2391-50 Exam Questions: Initial Verification Mock Papers
Written by Acacio Oliveira, founder of FreeMocks, plumbing and heating engineer (F-Gas registered).
These 2391-50 exam questions are for the City & Guilds initial verification qualification: inspecting and testing new work before it's put into service, then filling in the right certificate. If you mainly install and sign off your own circuits, this is the exam you're after.
The questions stick to new work. Electrical Installation Certificates, Minor Works certificates and schedules, safe isolation, test instruments, and the dead and live tests in the right order, calculations included. There are 8 timed mocks of 40 questions and the first one is free. Your centre confirms the real exam format and which books you can use.
Mock exams
2391-50
Initial Verification
40 questions · 80 minutes · 60% to pass
Open book: Usually BS 7671, IET Guidance Note 3 and the IET On-Site Guide. Confirm with your centre.
Find it in the book: Some answers show the page where you can find it in BS 7671:2018+A4:2026 and IET Guidance Note 3 (2022 edition).
These mocks cover the online multiple-choice exam. The qualification also includes a written paper and practical assessment.
Practise in the real exam format
Take timed papers, flag questions to revisit, and review every answer after submitting. Mock 1 is free.
About the 2391-50 exam
- Focused on initial verification of new installations, additions and alterations. Periodic reports are covered on the 2391-51 page.
- Certification questions on the EIC, the Minor Electrical Installation Works Certificate and the schedules of inspection and test results.
- Testing questions follow the dead then live sequence and include the calculations you'll be asked to do.
- Usually open book with BS 7671, IET Guidance Note 3 and the On-Site Guide. Check with your centre.
- Our mock: 40 questions, 80 minutes, 60% pass mark. City & Guilds and your centre set the real format.
- 320 questions in the bank, each with a full explanation.
How the online 2391-50 mock exam works
Each mock works like an online exam simulator for the 2391-50: the same number of questions and time limit as the real exam, flags for questions to revisit, then your score and a worked answer for every question.
| Questions per mock | 40 |
|---|---|
| Time limit | 80 minutes |
| Pass mark | 60% |
| Books | Open book: Usually BS 7671, IET Guidance Note 3 and the IET On-Site Guide. Confirm with your centre. |
| Mock exams | 8 (1 free) |
Who this mock exam is for
This exam suits electricians who install new work and want to certify it themselves, and those working towards competent person scheme membership. It is narrower than 2391-52 because it does not cover periodic inspection of existing installations.
Questions cover the inspection checklist, the correct sequence of dead and live tests, continuity, insulation resistance, polarity, earth electrode resistance, earth fault loop impedance, prospective fault current, RCD and functional testing, and completing the schedule of test results.
How to get the most from the mocks
Learn the order of tests and the reason for it. The exam often asks why one test must come before another, for example why continuity of protective conductors is confirmed before any live test.
Get comfortable with the tables. You will need to find maximum earth fault loop impedance values, minimum insulation resistance values and the correct test voltages, and then compare them with readings given in the question.
Read every workout after each mock, including on the questions you got right. Understanding why the wrong answers are wrong is the best preparation for questions that are worded differently on the day.
2391-50: frequently asked questions
What's the difference between 2391-50, 2391-51 and 2391-52?
2391-50 is initial verification only: testing and certifying new work. 2391-51 is periodic inspection and EICRs on existing installations. 2391-52 combines both. If you only sign off new installs, 2391-50 fits. If you also want to carry out EICRs, look at 2391-52 instead.
Which certificates come up in the 2391-50 exam?
Expect questions on the Electrical Installation Certificate, the Minor Electrical Installation Works Certificate and the schedules that go with them. You'll need to know which form suits which job and what has to be recorded on it. Our mocks test both.
Are there calculations in the initial verification exam?
Yes. Testing questions often ask you to work something out, such as checking a measured reading against the maximum allowed in BS 7671. Our explanations show the working step by step, so you see where the marks go and not just which letter was right.
Are these the real 2391-50 exam questions?
No. They're original practice questions written by FreeMocks from BS 7671:2018+A4:2026 and IET Guidance Note 3. We're independent and not linked to City & Guilds. The first mock is free, so try it and see where you stand.
