Abrasive Wheels Test Practice
Written by Acacio Oliveira, founder of FreeMocks, plumbing and heating engineer (F-Gas registered).
Anyone who mounts or uses grinders and cut-off saws needs abrasive wheels training. These timed mocks get you ready for the test at the end of the course.
The questions cover the law under PUWER 1998, training and competence, wheel types, markings and maximum speeds, mounting, flanges, guards and inspection, and safe use. Every question is original, written from HSE's free HSG17 guidance, with a full explanation and worked examples for the speed checks. You get 80 questions across 4 mocks, and the first mock is free.
Mock exams
ABRASIVE-WHEELS
Abrasive Wheels Awareness
20 questions · 20 minutes · aim for 80%
Closed book. Course tests are usually closed book.
Find it in the book: Every answer shows the page where you can find it in HSE HSG17 (3rd edition, 2000).
Practise in the real exam format
Take timed papers, flag questions to revisit, and review every answer after submitting. Mock 1 is free.
About the Abrasive Wheels exam
- For anyone who mounts, changes or uses abrasive wheels: angle grinders, cut-off saws and bench grinders
- Mocks are 20 questions in 20 minutes; aim for 80%
- Topics: the law, training and competence; wheel types, markings and speeds; mounting, guards and inspection; safe use and hazards
- Written from HSE HSG17 Safety in the use of abrasive wheels
- Includes spindle speed checks with worked examples
How the online Abrasive Wheels mock exam works
Each mock is a timed online practice exam: answer every question against the clock, flag the ones you're unsure of, then get your score and a worked answer for every question.
| Questions per mock | 20 |
|---|---|
| Time limit | 20 minutes |
| Our target score | 80% |
| Books | Closed book. Course tests are usually closed book. |
| Mock exams | 4 (1 free) |
Abrasive Wheels: frequently asked questions
Do I need training to change a grinding disc?
Yes. Under PUWER 1998, anyone who mounts abrasive wheels must be trained and competent. HSG17 sets out what that training should cover.
What does the maximum speed on a wheel mean?
It's the highest speed the wheel is designed to run at. The machine's spindle speed must never be higher than the wheel's marked maximum speed.
Are the old Abrasive Wheels Regulations 1970 still in force?
No. They were revoked and replaced by PUWER 1998.
Are these the questions from my course provider?
No. Every question is original, written by FreeMocks from free HSE and government guidance. Course providers set their own end-of-course tests, so wording will differ, but the facts are the same.
Practice questions by topic
Free official guides to download
Our questions are written from these documents. Download them free to revise from the source.
- HSG17 Safety in the use of abrasive wheelsHSE · PDF · 2.5 MB2000 edition, written for PUWER 1998. Some British Standards it mentions have since been replaced.
© Crown copyright (HSE). Unchanged copies, reproduced under the Open Government Licence v3.0. FreeMocks is not connected to or endorsed by HSE or the government.
