2396 Exam Practice: City & Guilds Design and Verification Questions

Written by Acacio Oliveira, founder of FreeMocks, plumbing and heating engineer (F-Gas registered).

City & Guilds 2396 is the Level 4 design and verification qualification for electricians. The written exam is all about doing the design maths quickly and choosing the right regulation, so this is where you practise it. We don't run the course.

You get 180 questions across 6 mocks, written from BS 7671:2018+A4:2026 and Guidance Note 3: supply characteristics and maximum demand, protective devices, cable sizing with correction factors, voltage drop, fault current, Zs and the adiabatic equation, and verification. Every calculation has the working shown. The real exam is a written paper, not multiple choice, so use these mocks to drill the method and the numbers. The first mock is free.

Mock exams

2396-01

Design and Verification of Electrical Installations

30 questions · 1 hour · 60% to pass

Open book: Usually BS 7671 and the IET On-Site Guide or Guidance Note 3. Confirm with your centre.

Find it in the book: Every answer shows the page where you can find it in BS 7671:2018+A4:2026 and IET Guidance Note 3 (2022 edition).

Practise in the real exam format

Take timed papers, flag questions to revisit, and review every answer after submitting. Mock 1 is free.

About the 2396 Design exam

  • 2396 is the City & Guilds Level 4 Award in the Design and Verification of Electrical Installations
  • Assessed by a written exam and a design assignment. Most centres expect 2382 and inspection and testing (2391) first
  • Topics: design for supply, demand and protection; cable selection and calculations; verification and certification
  • Our mocks are 30 multiple-choice questions in 60 minutes with a 60% pass mark. City & Guilds and your centre set the real exam
  • Questions written from BS 7671:2018+A4:2026 and Guidance Note 3, with worked calculations
  • Pick exam mode for a timed run, or instant mode to check each answer as you go

How the online 2396 Design mock exam works

Each mock works like an online exam simulator for the 2396 Design: the same number of questions and time limit as the real exam, flags for questions to revisit, then your score and a worked answer for every question.

Questions per mock30
Time limit1 hour
Pass mark60%
BooksOpen book: Usually BS 7671 and the IET On-Site Guide or Guidance Note 3. Confirm with your centre.
Mock exams6 (1 free)

2396 Design: frequently asked questions

What is the 2396 exam like?

It's a written City & Guilds exam, around three hours, plus a design assignment you complete in your own time. Expect cable sizing, voltage drop, fault current and earth fault loop impedance calculations, protective device selection and verification questions. Check the exact format with your centre.

Are these real 2396 exam questions?

No. FreeMocks is independent and not affiliated with City & Guilds or the IET. Every question is original, written from BS 7671:2018+A4:2026 and Guidance Note 3, with the working shown on every calculation.

Should I take 2391 before 2396?

Most centres recommend it. 2396 includes verification, so knowing the inspection and testing side from 2391-52 makes it much easier. You'll also need a solid grasp of BS 7671 from the 18th Edition (2382).

Is this a 2396 course?

No. We don't run training courses. Use these mocks alongside your 2396 course to practise the design calculations and regulation look-ups.

Practice questions by topic

Revision guides for this exam

Related mock exams