Electrical Safety Awareness Test Practice
Written by Acacio Oliveira, founder of FreeMocks, plumbing and heating engineer (F-Gas registered).
You don't have to be an electrician to be at risk from electricity at work. These timed mocks are for non-electricians on site, in workshops and in maintenance roles taking an electrical safety awareness course.
The questions cover the Electricity at Work Regulations 1989 and everyone's duties, the dangers of shock, burns, fire and arcing, safe isolation and working dead, and portable equipment, inspections, RCDs and reduced-voltage tools. Every question is original, written from HSE's free HSR25, HSG85 and INDG231 guidance, with a full explanation. You get 120 questions across 6 mocks, and the first mock is free.
Mock exams
ELEC-SAFETY
Electrical Safety Awareness
20 questions · 20 minutes · aim for 80%
Closed book. Course tests are usually closed book.
Find it in the book: Every answer shows the page where you can find it in HSE HSR25 (3rd edition, 2015), HSE HSG85 (3rd edition, 2013) and HSE INDG231 (rev1, 2012).
Practise in the real exam format
Take timed papers, flag questions to revisit, and review every answer after submitting. Mock 1 is free.
About the Electrical Safety exam
- For non-electricians: site workers, maintenance staff, workshop and facilities teams
- Mocks are 20 questions in 20 minutes; aim for 80%
- Topics: Electricity at Work Regulations and duties; shock, burns, fire and arcing; safe isolation and working dead; portable equipment and safe practices
- Written from HSE HSR25 (Electricity at Work Regulations guidance), HSG85 and INDG231
- Not BS 7671: for electricians' exams see the 18th Edition and 2391 mocks
How the online Electrical Safety mock exam works
Each mock is a timed online practice exam: answer every question against the clock, flag the ones you're unsure of, then get your score and a worked answer for every question.
| Questions per mock | 20 |
|---|---|
| Time limit | 20 minutes |
| Our target score | 80% |
| Books | Closed book. Course tests are usually closed book. |
| Mock exams | 6 (1 free) |
Electrical Safety: frequently asked questions
Who do the Electricity at Work Regulations apply to?
Employers, the self-employed and employees: everyone at work has duties under the Electricity at Work Regulations 1989, as far as matters within their control.
Why are 110 V tools used on site?
Reduced low voltage (110 V centre-tapped to earth) means the maximum shock voltage to earth is about 55 V, which greatly reduces the risk of a fatal shock.
Are these the questions from my course provider?
No. Every question is original, written by FreeMocks from free HSE and government guidance. Course providers set their own end-of-course tests, so wording will differ, but the facts are the same.
Practice questions by topic
Free official guides to download
Our questions are written from these documents. Download them free to revise from the source.
- INDG231 Electrical safety and you: a brief guideHSE · PDF · 0.3 MB
- HSR25 The Electricity at Work Regulations 1989: guidanceHSE · PDF · 0.3 MB
- HSG85 Electricity at work: safe working practicesHSE · PDF · 0.4 MB
© Crown copyright (HSE). Unchanged copies, reproduced under the Open Government Licence v3.0. FreeMocks is not connected to or endorsed by HSE or the government.
