CITB Refrigeration and AC: F gas law, qualifications, leak checks and records practice questions

Written by Acacio Oliveira, founder of FreeMocks, plumbing and heating engineer (F-Gas registered).

40 of our 200 CITB HS&E Specialist Test: Refrigeration and Air Conditioning (CITB-SPEC-RAAC) questions are on f gas law, qualifications, leak checks and records, about 20% of the bank. Try 6 below with full worked answers, then practise the rest in a timed mock.

Practice questions

Pick an answer to see why it's right, why the others are wrong, and the page in the book.

Q1. Which two things decide how often equipment must be checked for F gas leaks?

Show answer

Answer: A. The amount of F gas and its GWP

  • How often you must check depends on the amount of F gas in the equipment.
  • It also depends on the global warming potential of the gas.

Together these give the CO2 equivalent used in the leak check table.

Why the others are wrong:

B: age and kW output are not the factors given in the guidance.

C: building use does not set the leak check frequency.

D: frequency depends on the CO2 equivalent, not compressor type or pressure.

Memory trick:

Kilos and GWP set the calendar.

Find it in the book

Checking F gas equipment for leaks

Reg GOV.UK F gas guidance: Checking F gas equipment for leaks (published 21 August 2019)

Q2. A non-hermetic split system holds 3kg of R410A (GWP 2088) and has no automatic leak detection. How often must it be leak checked?

Show answer

Answer: B. At least once every 12 months

  • CO2 equivalent = mass in tonnes x GWP: 0.003 x 2088 = 6.26 tonnes CO2e.
  • Equipment with 5 to less than 50 tonnes CO2e must be checked at least once every 12 months.

Always convert the charge to CO2 equivalent before choosing the check frequency.

Why the others are wrong:

A: 6 months applies from 50 to less than 500 tonnes CO2 equivalent.

C: this frequency is not the band for a system of about 6 tonnes CO2 equivalent.

D: the threshold is 5 tonnes CO2 equivalent, not 5kg; this system is over it.

The maths

3kg / 1,000 = 0.003 tonnes
0.003 x 2,088 = 6.26 tonnes CO2e
6.26 is in the 5 to under 50 band, so at least every 12 months

Memory trick:

5 to 50 tonnes: once a year.

Find it in the book

Checking F gas equipment for leaks

Reg GOV.UK F gas guidance: Checking F gas equipment for leaks (published 21 August 2019)

Q3. A supermarket central pack holds 150kg of R404A (GWP 3922). What does this mean for automatic leak detection?

Show answer

Answer: A. It must be fitted: the pack is over 500 tonnes

  • 150kg x 3922 / 1,000 = 588 tonnes CO2e.
  • You must fit a leak detection system if equipment contains 500 tonnes CO2e or more (about 127kg of R404A).

The detection system must alert the user or the service company if it detects a leak.

Why the others are wrong:

B: at this size it is a legal requirement, not an option.

C: the requirement is based on the CO2e quantity, not on leak history.

D: 350kg is the R134a figure; for R404A the 500 tonne point is about 127kg.

The maths

150kg / 1,000 x 3,922 = 588 tonnes CO2e
588 is over 500, so automatic leak detection must be fitted

Memory trick:

500 tonnes or more: detector is the law.

Find it in the book

Checking F gas equipment for leaks

Reg GOV.UK F gas guidance: Checking F gas equipment for leaks (published 21 August 2019)

Q4. A customer wants a new single split AC system (one indoor coil, one outdoor unit) holding 2kg of refrigerant, to cool an office. What is the GWP limit for its F gas?

Show answer

Answer: B. Its GWP must not be above 750

  • Single split systems with less than 3kg of refrigerant are banned from using F gases with a GWP above 750, from 2025.
  • A single split is one cooling coil connected to a remote condensing unit.

You must not place banned equipment on the GB market.

Why the others are wrong:

A: 150 is the limit for movable AC units and domestic fridges, not single splits.

C: 2,500 is the limit for stationary refrigeration equipment.

D: 1,500 relates to the cascade exception for large multipack systems.

Memory trick:

Small single split: 750 tops.

Find it in the book

Bans on F gas in new products and equipment: current and future

Reg GOV.UK F gas guidance: Bans on F gas in new products and equipment: current and future (updated 27 August 2026)

Q5. Who is normally responsible for getting stationary air conditioning equipment checked for F gas leaks?

Show answer

Answer: D. The user, though a rental deal can change this

  • If you use stationary refrigeration, AC or heat pump equipment, you're responsible for getting it checked for leaks.
  • If you rent out equipment, you may be responsible instead, depending on the rental agreement.

Technicians share responsibility for stopping leaks with users.

Why the others are wrong:

A: the duty sits with the user of the equipment, not the original installer.

B: certification bodies audit companies; they do not take on leak check duties.

C: the guidance places the leak check duty on the user, not the manufacturer.

Memory trick:

User arranges the leak check.

Find it in the book

Checking F gas equipment for leaks

Reg GOV.UK F gas guidance: Checking F gas equipment for leaks (published 21 August 2019)

Q6. A system is charged with gas that was recycled or reclaimed. Which extra details must its records include?

Show answer

Answer: B. Amount recovered and the facility's name, address and cert number

  • If gas used has been recycled or reclaimed, record the quantity of gases recovered.
  • Also record the name, address and certificate number of the recycling or reclamation facility.

This shows the gas came from a legitimate source.

Why the others are wrong:

A: cylinder details are not the information the guidance asks for.

C: rounded GWP is not one of the required extra details.

D: the record is about the recycling or reclamation facility, not the first maker.

Memory trick:

Second-hand gas: record where it was cleaned.

Find it in the book

Record F gas in equipment you own or service

Reg GOV.UK F gas guidance: Record F gas in equipment you own or service (published 21 August 2019)

Want 194 more CITB Refrigeration and AC questions? Start a free timed mock.

Start a free mock

Full mock, no card needed. Full workouts on the first 5 questions.

Other CITB Refrigeration and AC topics

Free official guides for this topic

Our questions are written from these documents. Download them free to revise from the source.

© Crown copyright (HSE). Unchanged copies, reproduced under the Open Government Licence v3.0. FreeMocks is not connected to or endorsed by HSE or the government.

Revise this topic