ECS HS&E: Fire and Emergency practice questions

Written by Acacio Oliveira, founder of FreeMocks, plumbing and heating engineer (F-Gas registered).

71 of our 400 ECS Health, Safety and Environmental Assessment (ECS-HSE) questions are on fire and emergency, about 18% of the bank. Try 6 below with full worked answers, then practise the rest in a timed mock.

Practice questions

Pick an answer to see why it's right, why the others are wrong, and the page in the book.

Q1. A plumber has run a pipe through a fire-rated wall. Why must the gap around the pipe be fire-stopped?

Show answer

Answer: C. To delay fire and smoke passing through

  • Fire-stopping seals openings in fire-resistance-rated walls and floors.
  • It delays the passage of fire and smoke through those openings.

Any opening made for pipes or wiring weakens the wall unless it is sealed.

Why the others are wrong:

A: fire-stopping is about fire and smoke, not expansion.

B: support is not the purpose of fire-stopping.

D: condensation is not what fire-stopping deals with.

Memory trick:

Hole in a fire wall? Seal it, or fire walks through it.

Reg Fire-stopping

Q2. Why is raising the alarm treated as the priority when you discover a fire?

Show answer

Answer: A. It reduces the risk to others if the fire spreads

  • Raising the alarm gives everyone else the chance to get out.
  • It matters most if the fire spreads, which can happen quickly.

A small fire can become a large one fast, so the warning must go out early.

Why the others are wrong:

B: reporting still happens; the alarm is about protecting people.

C: once the alarm is raised everyone, including you, should evacuate.

D: the alarm should be raised whatever the size of the fire.

Memory trick:

Alarm first protects the rest.

Reg Fire safety

Q3. A workmate grabs a section of copper pipe that has just been brazed and burns their palm. What should you do first?

Show answer

Answer: A. Cool the burn with cold water

  • Burns need immediate and sustained cooling.
  • Cold water is the first action if it is available.

Cooling straight away limits the damage the heat can do.

Why the others are wrong:

B: this does nothing to cool the burn, which is the priority.

C: burns need cooling immediately, not after a wait.

D: the burn needs cooling straight away.

Memory trick:

Burn? Cool it, don't cover it.

Reg First aid

Q4. Why must everyone go to the fire assembly point when the alarm sounds?

Show answer

Answer: D. So fire marshals or supervisors know who is safe

  • The assembly point is a place of safety where people gather when the alarm sounds.
  • Supervisors or fire marshals use it to account for everyone.

Going anywhere else means nobody knows whether you are safe.

Why the others are wrong:

A: the assembly point is for site personnel, not for fire service equipment.

B: extinguishers are not stored at the assembly point for collection.

C: resetting the alarm is not the purpose of the assembly point.

Memory trick:

Assemble so you can be COUNTED.

Reg Fire safety

Q5. A distribution board is on fire. Which extinguisher band colours should you look for?

Show answer

Answer: C. Black or blue

  • Electrical fires: carbon dioxide (black) or dry powder (blue).
  • Liquids should not be used because they may conduct electricity.

Combining band colours with suitability is how you choose quickly in an emergency.

Why the others are wrong:

A: red is water, which may conduct electricity.

B: water must not be used on electrical fires.

D: red is water, which may conduct electricity.

Memory trick:

Electrics? Black or Blue, never Red.

Reg Fire safety

Q6. The fire alarm sounds while you are halfway through terminating a cable. What should you do?

Show answer

Answer: A. Stop and go to the fire assembly point

  • When the alarm sounds, evacuate to the designated place of safety: the fire assembly point.
  • Do not stop to finish work or investigate.

The assembly point lets supervisors and fire marshals know you are out and safe.

Why the others are wrong:

B: you must not delay evacuation to finish work.

C: staying at your workstation is not evacuating to the place of safety.

D: every alarm means evacuate; do not wait to find out why.

Memory trick:

Alarm on, tools down, go to the point.

Reg Fire safety

Want 394 more ECS HS&E questions? Start a free timed mock.

Start a free mock

Full mock, no card needed. Full workouts on the first 5 questions.

Other ECS HS&E topics

Revise this topic