CITB Supervisory: Managing health and safety and supervisors' duties practice questions

Written by Acacio Oliveira, founder of FreeMocks, plumbing and heating engineer (F-Gas registered).

40 of our 200 CITB HS&E Specialist Test: Supervisory (CITB-SPEC-SUP) questions are on managing health and safety and supervisors' duties, about 20% of the bank. Try 6 below with full worked answers, then practise the rest in a timed mock.

Practice questions

Pick an answer to see why it's right, why the others are wrong, and the page in the book.

Q1. Which topics would you expect to see in the site rules of a construction phase plan?

Show answer

Answer: D. Restricted areas and hot works

  • Site rules should cover topics such as PPE, parking, radios and mobile phones, smoking, restricted areas, hot works and emergency arrangements.
  • They must be clear and brought to everyone's attention.

Translations may be needed for some workers.

Why the others are wrong:

A: holiday planning is not a site rule.

B: commercial figures are not site rules.

C: fees have nothing to do with site rules.

Memory trick:

Site rules: what, where, when.

Find it in the book

HSE L153 (CDM 2015), page 79

Reg HSE L153 Appendix 3, para 13, site rules

Q2. When might the same task need a higher level of supervision than usual?

Show answer

Answer: A. At shift changeover or with young workers

  • Set the level of supervision by the task's complexity and level of risk.
  • More may be needed at certain times, eg during shift changeover or with young or inexperienced workers.

Supervisors should also be included in assessing risks and managing change.

Why the others are wrong:

B: a client visit does not change the risk of the task.

C: progress is not a reason given in HSG65.

D: induction alone does not reduce supervision needs.

Memory trick:

Handover or new face? Watch closer.

Find it in the book

HSE HSG65 (3rd edition, 2013), page 32

Reg HSG65, key actions in supervising for health and safety

Q3. A skilled bricklayer is promoted to site supervisor. What training does CDM guidance say they should get?

Show answer

Answer: A. Site supervisor training covering leadership

  • Where site workers are promoted to a supervisory role, they should get nationally recognised site supervisor training.
  • It should include leadership and communication skills.

Good people management is a key quality in supervisors.

Why the others are wrong:

B: trade skill is not what the new role needs.

C: this does not prepare them to supervise.

D: first aid does not cover the supervisory role.

Memory trick:

New supervisor? Train to lead.

Find it in the book

HSE L153 (CDM 2015), page 48

Reg HSE L153 para 171

Q4. A contractor will work in a plant room you know has asbestos lagging. What should you do?

Show answer

Answer: C. Tell them about the asbestos before they start

  • Remember that some risks may not be obvious to the contractor.
  • Tell the contractor about any specific risks, eg the presence of asbestos.

Ask them in turn about any extra risks they will bring to your site.

Why the others are wrong:

A: you must tell contractors about specific risks.

B: the information is needed before work begins.

D: some workplace risks may not be obvious to a contractor.

Memory trick:

Know a hazard? Share it first.

Find it in the book

HSE HSG65 (3rd edition, 2013), page 33

Reg HSG65, joint risk assessment with the contractor

Q5. What does HSG65 say about training and competence?

Show answer

Answer: C. Training alone does not make someone competent

  • Training alone does not achieve competence.
  • Make sure competence is achieved through consolidation and practical experience.

Induction, coaching and supervision reinforce learning.

Why the others are wrong:

A: HSG65 says experience consolidates training.

B: competence combines skills, knowledge and experience.

D: competence also needs consolidation and practical experience.

Memory trick:

Course plus practice equals competence.

Find it in the book

HSE HSG65 (3rd edition, 2013), page 40

Reg HSG65, key actions in competence

Q6. A worker is exposed to serious and imminent danger. What should the site procedure tell them to do?

Show answer

Answer: B. Stop work, report it and get to a safe place

  • Workers exposed to such danger should stop work immediately, report it to the contractor and go to a place of safety.
  • Procedures should name who to report to and who can take prompt action.

Supervisors make sure everyone knows this.

Why the others are wrong:

A: they must stop straight away.

C: they should stop immediately, not finish first.

D: serious danger needs an immediate response.

Memory trick:

Stop, tell, go.

Find it in the book

HSE L153 (CDM 2015), page 48

Reg HSE L153 para 173(b)

Want 194 more CITB Supervisory questions? Start a free timed mock.

Start a free mock

Full mock, no card needed. Full workouts on the first 5 questions.

Other CITB Supervisory topics

Free official guides for this topic

Our questions are written from these documents. Download them free to revise from the source.

© Crown copyright (HSE). Unchanged copies, reproduced under the Open Government Licence v3.0. FreeMocks is not connected to or endorsed by HSE or the government.

Revise this topic