BS numbers for protective devices

Updated 15 October 2026. Written by Acacio Oliveira, founder of FreeMocks, plumbing and heating engineer (F-Gas registered).

Electrical Installation Certificates and EICRs ask for the BS (EN) number of every protective device, and exam questions test whether you know them. Here they are in one place, from MCBs to surge protection.

Protective devices

DeviceStandard
MCB (household and similar)BS EN 60898-1
MCCB and industrial circuit breakersBS EN 60947-2
RCD without overcurrent protection (RCCB)BS EN 61008-1
RCBOBS EN 61009-1
Type B RCDBS EN 62423
RDC-DD (DC detection for EV charging)IEC 62955
AFDDBS EN 62606
Cartridge fuse, industrial (gG)BS 88-2
Cartridge fuse, domestic (formerly BS 1361)BS 88-3
Plug-top fuseBS 1362
Semi-enclosed (rewirable) fuseBS 3036

Other equipment you'll be asked about

EquipmentStandard
Consumer units and low-voltage assembliesBS EN 61439-3
Surge protective devicesBS EN 61643-11
Switches and isolators (switch disconnectors)BS EN 60947-3
13 A plugs and socket-outletsBS 1363
Flat twin and earth cableBS 6004
Steel wire armoured cableBS 5467 (BS 6724 for low smoke)

Practise for it

BS numbers and device types are quick marks in the 18th Edition and 2391 exams. Test yourself with timed mocks.

Frequently asked questions

What is the BS number for an MCB?

BS EN 60898-1 for circuit breakers for household and similar installations. Larger industrial MCBs and MCCBs are to BS EN 60947-2.

What is the BS number for an RCD?

An RCD without overcurrent protection (an RCCB) is to BS EN 61008-1. A Type B RCD is to BS EN 62423.

What is the BS number for an RCBO?

BS EN 61009-1. An RCBO combines an MCB and an RCD in one device.

What is the BS number for an AFDD?

BS EN 62606, for arc fault detection devices.

What is the BS number for a rewirable fuse?

BS 3036, for semi-enclosed (rewirable) fuses. They need a correction factor of 0.725 when sizing cables because of their poor fusing performance.

Related

Sources: BS 7671:2018 as amended and the standards listed. FreeMocks is independent and not affiliated with the IET or BSI. Check the marking on the device itself when completing a certificate.