Fire Marshal: How fires start and spread practice questions

Written by Acacio Oliveira, founder of FreeMocks, plumbing and heating engineer (F-Gas registered).

30 of our 120 Fire Marshal (Fire Warden) Training (FIRE-MARSHAL) questions are on how fires start and spread, about 25% of the bank. Try 6 below with full worked answers, then practise the rest in a timed mock.

Practice questions

Pick an answer to see why it's right, why the others are wrong, and the page in the book.

Q1. A decorator has rags soaked in solvent at the end of a shift. How does HSG168 say they should be disposed of?

Show answer

Answer: A. In a metal waste container fitted with a metal lid

  • Dispose of contaminated rags safely: waste containers must be metal and suitably covered with a metal lid.
  • Clothing contaminated with flammable liquids should be removed immediately and not stored.

HSG168 also asks for drip trays and closed-top containers to limit spills of flammable liquids.

Why the others are wrong:

B: plastic bags burn and the rags stay inside the building.

C: the guidance asks for a covered metal container, not an open skip.

D: leaving them out keeps contaminated fuel on site, and oily rags can self-heat.

Memory trick:

Soaked rags: metal bin, metal lid.

Find it in the book

HSE HSG168 Fire safety in construction (3rd edition, 2022), page 30

Reg HSE HSG168 Fire safety in construction, para 164

Q2. Fire spreads by convection, conduction and radiation. Which method is the most dangerous and causes the most injuries and deaths?

Show answer

Answer: C. Convection

  • Fire spread by convection is the most dangerous and causes the largest number of injuries and deaths.
  • Hot smoke rises, is trapped by the ceiling and spreads as an ever-deepening layer, passing through gaps into other parts of the building.

This is why holes in walls and ceilings and wedged-open doors are so dangerous.

Why the others are wrong:

A: conduction moves heat through materials like metal, but it is not the most dangerous.

B: radiation heats nearby materials, but convection causes the most harm.

D: this is a way some fires start, not one of the three ways fire spreads.

Memory trick:

Convection carries the killer smoke.

Find it in the book

GOV.UK Fire safety risk assessment: offices and shops (2006), page 16

Reg GOV.UK Fire safety risk assessment: offices and shops, Part 1, Step 3.2: Evaluate the risk to people (Convection)

Q3. Which of these is a SOURCE OF IGNITION rather than a source of fuel on a construction site?

Show answer

Answer: D. Friction heat from a disc cutter

  • Ignition sources include hot work, smokers' materials, naked flames, faulty electrics, friction-generated heat from equipment such as disc cutters, static and self-heating oily rags.
  • Fuels include structural materials, rubbish, scaffold sheeting, packaging and thinners.

Keeping ignition sources away from fuel stops the triangle forming.

Why the others are wrong:

A: scaffold sheeting is listed as a fuel.

B: volatile flammable materials such as thinners are fuels.

C: packaging materials are fuels.

Memory trick:

Sparks and friction light it; sheeting and paint feed it.

Find it in the book

HSE HSG168 Fire safety in construction (3rd edition, 2022), pages 12 to 13

Reg HSE HSG168 Fire safety in construction, paras 37 and 39

Q4. What does the guide say most people who die in fires are killed by?

Show answer

Answer: B. Being overcome by smoke and gases

  • The majority of people who die in fires are overcome by the smoke and gases.
  • So the rate of fire growth needs to be restricted in its early stages.

Measures that slow early fire growth also help restrict spread later on.

Why the others are wrong:

A: the guide says the majority are overcome by smoke and gases, not burned.

C: falls are not given as the main cause.

D: structural collapse is not given as the main cause.

Memory trick:

Smoke kills before flames do.

Find it in the book

GOV.UK Fire safety risk assessment: offices and shops (2006), page 49

Reg GOV.UK Fire safety risk assessment: offices and shops, Part 2, Section 1.11: Restricting the spread of fire and smoke

Q5. Why are deliberately set fires (arson) especially dangerous to people in a building?

Show answer

Answer: C. They tend to grow faster and may be set in escape routes

  • Deliberately set fires generally develop much faster.
  • They may be intentionally started in escape routes.

The guide says reducing the threat from arson may give the most benefit of all risk-reduction measures.

Why the others are wrong:

A: arson can happen at any time, including when people are inside.

B: the guide does not say this; the danger is speed and location.

D: arson can be started in escape routes inside buildings too.

Memory trick:

Arson is fast and aims at the exits.

Find it in the book

GOV.UK Fire safety risk assessment: offices and shops (2006), page 51

Reg GOV.UK Fire safety risk assessment: offices and shops, Part 2, Section 1.12: Arson

Q6. Why does the guide treat aerosol cans in a shop as a high fire hazard?

Show answer

Answer: C. When ignited they can explode and rocket up to 40m

  • Aerosols can contain flammable products stored at pressure.
  • When ignited they can explode, produce fireballs and rocket to distances of 40m, with the potential to start multiple fires.

Damaged or leaking cans should be moved straight away to a safe, secure, well-ventilated place before disposal.

Why the others are wrong:

A: the risk is explosion and fire spread, not false alarms.

B: the guide does not describe aerosols as metal fires.

D: pressurised cans can explode; they do not need to empty first.

Memory trick:

Aerosol on fire: a 40m rocket.

Find it in the book

GOV.UK Fire safety risk assessment: offices and shops (2006), page 44

Reg GOV.UK Fire safety risk assessment: offices and shops, Part 2, Section 1.3: Aerosols

Want 114 more Fire Marshal questions? Start a free timed mock.

Start a free mock

Full mock, no card needed. Full workouts on the first 5 questions.

Other Fire Marshal topics

Free official guides for this topic

Our questions are written from these documents. Download them free to revise from the source.

© Crown copyright (GOV.UK, HSE). Unchanged copies, reproduced under the Open Government Licence v3.0. FreeMocks is not connected to or endorsed by HSE or the government.

Revise this topic