Manual Handling: Risk assessment and the TILE factors practice questions

Written by Acacio Oliveira, founder of FreeMocks, plumbing and heating engineer (F-Gas registered).

30 of our 120 Manual Handling Awareness (MANUAL-HANDLING) questions are on risk assessment and the tile factors, about 25% of the bank. Try 6 below with full worked answers, then practise the rest in a timed mock.

Practice questions

Pick an answer to see why it's right, why the others are wrong, and the page in the book.

Q1. Why does L23 say you should cut down on work where a load is held in one fixed posture for a long time?

Show answer

Answer: A. It reduces blood flow, so the muscles tire quickly

  • Work in fixed postures reduces blood flow to the muscles, leading rapidly to fatigue, pain and reduced muscular efficiency.
  • Keep prolonged holding or supporting of a load to a minimum; consider a handling aid to support it.

Prolonged effort brings fatigue, and fatigue raises the risk of injury.

Why the others are wrong:

B: the weight does not change; the problem is muscle fatigue.

C: fixed postures cause fatigue whether standing or seated.

D: the risk L23 gives is fatigue and pain, not loss of vision.

Memory trick:

Hold still too long and the muscles tire fast.

Find it in the book

HSE L23 (4th edition, 2016), page 35

Reg Manual Handling Operations Regulations 1992, Schedule 1 (HSE L23, para 137)

Q2. A worker repetitively handles small, light items in the hands all shift. Which HSE tool may be more suitable than MAC?

Show answer

Answer: B. The ART tool

  • For largely repetitive handling of light loads in the hands, HSE's ART tool may be appropriate.
  • The MAC tool is more appropriate for loads above 8 kg.

ART looks at risks to the upper limbs.

Why the others are wrong:

A: V-MAC works with MAC for varied lifting, not light repetitive work.

C: RAPP is for pushing and pulling, not light repetitive hand work.

D: the filter is a screening step, not a tool for repetitive upper limb risk.

Memory trick:

Light and repetitive: ART. Heavier than 8 kg: MAC.

Find it in the book

HSE L23 (4th edition, 2016), page 59

Reg HSE L23, Appendix para 31

Q3. A packing task involves 15 lifts every minute. Why might a full risk assessment be needed instead of the MAC tool?

Show answer

Answer: C. MAC does not cover more than 12 lifts a minute

  • A full risk assessment is likely to be needed where tasks don't meet MAC or RAPP assumptions, eg more than 12 lifts per minute (one every five seconds).

If the loads are light and repetitive, the ART tool may also help.

Why the others are wrong:

A: MAC covers lifting, carrying and team handling.

B: employers can download and use the MAC tool free.

D: the MAC tool is more suited to loads above 8 kg.

Memory trick:

Over 12 a minute? MAC can't cope.

Find it in the book

HSE L23 (4th edition, 2016), page 58

Reg HSE L23, Appendix para 30

Q4. Which HSE tool is designed for assessing pushing and pulling operations?

Show answer

Answer: C. The RAPP tool

  • RAPP stands for Risk assessment of pushing and pulling.
  • It has separate score sheets for wheeled equipment and items without wheels.

It is part of HSE's MSD toolkit, along with MAC, V-MAC and ART.

Why the others are wrong:

A: MAC covers lifting, carrying and team handling.

B: ART covers repetitive tasks of the upper limbs.

D: V-MAC is for lifting where weights or frequencies vary.

Memory trick:

RAPP: Pushing and Pulling.

Find it in the book

HSE L23 (4th edition, 2016), page 57

Reg HSE L23, Appendix para 24

Q5. Courses often use 'TILE' to remember the main factors in L23's ergonomic approach. What do the letters stand for?

Show answer

Answer: B. Task, Individual capability, Load, Environment

  • L23 asks you to consider the task, the load, the working environment and individual capability.
  • Schedule 1 also lists other factors, such as PPE or clothing that hinders movement.

TILE is just a handy way to remember them.

Why the others are wrong:

A: these are not the four factors L23 lists.

C: instruction, location and equipment are not the four main factors.

D: training is one consideration, but these are not the four factors.

Memory trick:

TILE: what you do, who does it, what you lift, where you are.

Find it in the book

HSE L23 (4th edition, 2016), page 7

Reg Manual Handling Operations Regulations 1992, Schedule 1 (HSE L23, paras 13 and 44)

Q6. When does the frequency of lifting mean you need more than the simple filter?

Show answer

Answer: D. When lifts are more often than once every two minutes

  • A more detailed assessment is needed if handling is more frequent than one lift every two minutes.
  • Other triggers include torso twisting, team handling and loads that are hard to grasp.

As frequency rises, the weight people can comfortably handle falls.

Why the others are wrong:

A: the trigger is more frequent than this.

B: 12 a minute is where the MAC tool's assumptions end, not the filter trigger.

C: the trigger is less frequent than this.

Memory trick:

More than one lift per two minutes? Go beyond the filter.

Find it in the book

HSE L23 (4th edition, 2016), page 53

Reg HSE L23, Appendix para 7 (HSE INDG143, page 8)

Want 114 more Manual Handling questions? Start a free timed mock.

Start a free mock

Full mock, no card needed. Full workouts on the first 5 questions.

Other Manual Handling topics

Free official guides for this topic

Our questions are written from these documents. Download them free to revise from the source.

© Crown copyright (HSE). Unchanged copies, reproduced under the Open Government Licence v3.0. FreeMocks is not connected to or endorsed by HSE or the government.

Revise this topic