COSHH: Control measures, PPE and RPE practice questions

Written by Acacio Oliveira, founder of FreeMocks, plumbing and heating engineer (F-Gas registered).

30 of our 120 COSHH Awareness (COSHH-AWARE) questions are on control measures, ppe and rpe, about 25% of the bank. Try 6 below with full worked answers, then practise the rest in a timed mock.

Practice questions

Pick an answer to see why it's right, why the others are wrong, and the page in the book.

Q1. Regulation 7(4) requires the quantity of hazardous substances at the workplace to be kept to the minimum needed. Does this stop an employer buying in bulk to save money?

Show answer

Answer: B. No, the aim is to limit how much could be released at work

  • L5 para 96: regulation 7(4)(c)(iii) is not intended to prevent employers buying in bulk to reduce costs.
  • It aims to reduce the overall risk by minimising the amount potentially released into the working area.

Keep the bulk store controlled, and only bring out what the job needs.

Why the others are wrong:

A: L5 says the requirement is not intended to prevent bulk buying.

C: no exemption is needed; bulk buying is not prohibited.

D: regulation 7(4) applies to all substances hazardous to health.

Memory trick:

Bulk in store is fine; minimum out on the job.

Find it in the book

HSE L5 (6th edition, 2013), page 30

Reg COSHH Regulations 2002, reg 7(4)(c)(iii); HSE L5, para 96

Q2. At the end of a dusty task, what does COSHH say should happen to PPE that may be contaminated?

Show answer

Answer: B. Remove it on leaving the area and keep it apart from clean clothing

  • Regulation 9(6): PPE that may be contaminated must be removed on leaving the working area and kept apart from uncontaminated clothing and equipment.
  • Regulation 9(7): it must then be decontaminated and cleaned or, if necessary, destroyed.

This stops the contamination travelling to canteens, vans and homes.

Why the others are wrong:

A: taking contaminated PPE home spreads the substance; it must be kept apart.

C: it must be kept apart from uncontaminated clothing, not hung with it.

D: it must be removed on leaving the working area.

Memory trick:

Dirty kit stays at work, apart from clean.

Find it in the book

HSE L5 (6th edition, 2013), page 43

Reg COSHH Regulations 2002, reg 9(6) and (7)

Q3. How often must local exhaust ventilation (LEV) normally have a thorough examination and test?

Show answer

Answer: D. At least once every 14 months

  • Regulation 9(2)(a): LEV must have a thorough examination and test at least once every 14 months.
  • Some processes in Schedule 4 need more frequent tests, eg every month or 6 months.

The tester must be competent.

Why the others are wrong:

A: 5 years is how long the test records must be kept, not the test interval.

B: once a week is the guide for visual checks, not the thorough test.

C: LEV must be examined and tested regularly, not just at installation.

Memory trick:

LEV: test inside 14 months.

Find it in the book

HSE L5 (6th edition, 2013), page 43

Reg COSHH Regulations 2002, reg 9(2)(a); HSE INDG136 (rev5)

Q4. A boss says: 'I've given them all masks, so the problem is solved.' What does HSE say?

Show answer

Answer: A. Control the source first; then masks may not be needed

  • INDG136 myth: 'I've given them all masks, problem solved.' Reality: this won't solve it.
  • Control the source of exposure and then they might not need masks.

PPE is the last line of defence, not the first.

Why the others are wrong:

B: INDG136 says masks alone won't solve it; control the source.

C: masks are a backup after source control, not a response to complaints.

D: sharing RPE without cleaning is unsafe, and it doesn't control the source.

Memory trick:

Fix the source, not just the face.

Find it in the book

HSE INDG136 (rev5, 2012), page 6

Reg HSE INDG136 (rev5), myth: I've given them all masks

Q5. Where should your RPE be stored when you're not using it?

Show answer

Answer: B. In a clean, dust-free place

  • INDG463: make sure RPE is stored in a clean, dust-free place.
  • L5 para 198: storage should protect PPE from contamination, loss or damage, eg by harmful substances, damp or sunlight.

A dirty mask can put dust straight onto your face.

Why the others are wrong:

A: a van dashboard isn't a clean, dust-free store and exposes RPE to sunlight.

C: worn round the neck it collects dust on the inside of the face seal.

D: a tool bag is dusty and can damage the mask and its valves.

Memory trick:

Clean mask, clean store.

Find it in the book

HSE INDG463 (2024), page 3

Reg HSE INDG463, If you have to wear RPE

Q6. According to INDG136, what is the FIRST priority when choosing control measures?

Show answer

Answer: B. Eliminate the harmful product and use a safer one

  • INDG136 order: 1 eliminate and use a safer product; 2 safer form; 3 change the process; 4 enclose; 5 extract near the source; 6 fewer workers exposed; 7 PPE.
  • PPE must fit the wearer.

If the hazard isn't there, nobody can be exposed to it.

Why the others are wrong:

A: PPE is the last item in INDG136's order of priority.

C: extraction near the source comes fifth in the list.

D: enclosure is fourth, after elimination, a safer form and a process change.

Memory trick:

Get rid of it first; PPE last.

Find it in the book

HSE INDG136 (rev5, 2012), page 5

Reg HSE INDG136 (rev5), Choosing control measures

Want 114 more COSHH questions? Start a free timed mock.

Start a free mock

Full mock, no card needed. Full workouts on the first 5 questions.

Other COSHH topics

Free official guides for this topic

Our questions are written from these documents. Download them free to revise from the source.

© Crown copyright (HSE). Unchanged copies, reproduced under the Open Government Licence v3.0. FreeMocks is not connected to or endorsed by HSE or the government.

Revise this topic